In a sawmill setup, it is essential to ensure that the pulleys are perfectly aligned to ensure smooth and efficient operation. Here are the detailed steps to achieve precise alignment:

Step 1: Verify Initial Pulley Alignment

Before starting with the alignment process, it is important to check the initial position of the pulleys. Use a straightedge ruler or a measuring tool to ensure that the pulleys are aligned both horizontally and vertically.

https://www.youtube.com/shorts/tfl4_5dVH4k

Step 2: Adjust the Blade Tension

Once the initial alignment has been verified, adjust the blade tension following the manufacturer's specifications. A properly tensioned blade will contribute to a precise and safe cut.

https://www.youtube.com/shorts/TUtvnogNUzk

Step 3: Adjust the bearing according to the blade tilt

Once you have aligned the sawmill pulleys and adjusted the blade tension, it is essential to check the blade tilt and correct any deviation to ensure a precise cut. For this, you must pay special attention to the direction in which the blade moves when turned manually.

If the blade moves forward, it indicates that the wheel is facing inward. In this case, you should loosen the rear bearing holder slightly and adjust the corresponding pin to move it in the opposite direction to the blade movement, ensuring correct alignment.

On the other hand, if the blade moves backwards, it means the steering wheel is pointing outwards. In this scenario, you will need to loosen the front bearing a bit and adjust the corresponding bolt to move it in the opposite direction to the blade movement, achieving the desired alignment.

It is crucial to make these adjustments with precision by loosening and adjusting the bearing bolts as necessary, to ensure that the blade is perfectly aligned, resulting in clean and precise cuts with every use of your sawmill.

With these detailed steps, your sawmill will be ready to operate optimally and efficiently, ensuring excellent results in your woodworking projects!